Scaffold prof. METAL 8 Mt 19.10 h. Working

Valutazione 

New product

PISCOPIELLO PONTEGGI

Disponibile

Scaffolding Mod. M8 Cod.M8183 / M8183HD

Professional scaffolding M8 working height Mt. 19.10 base dimensions mt. 2.60 x 1.14
Only structure to add the desired accessories from the appropriate section below Accessories

More details

4 295,00 € tax incl.

Request product info

Data sheet

ALTEZZA LAVOROda 19 a 20 mt
MATERIALEFerro zincato
INGOMBRO BASAMENTO250x110 cm

More info

TRABATTELLO METAL 8

Metal scaffolding 8: The Scaffolding in this composition is sold in a structure to be anchored to the wall or fixed structure (decree 81 of 208 art. 140) it is not possible to implement the UNI en 1004 STANDARD because the standard refers to the scaffolding that does not exceed the 8 m on the floor outdoors and 12 m indoors. then anchoring accessories and intermediate work surfaces with a maximum center distance of 4.30 m must be applied. AND REFER TO THE SAME Legislative Decree 81/2008.

IT IS POSSIBLE TO ADD ALL THE COMPONENTS ON THE RIGHT OF THE SCREEN

METAL SCAFFOLDING COMPONENT COMPOSITION 8

  • Base m.2,60x1,14: The base is made up of 4 swivel wheels with 200Ø brake driven on a square structure + 2 horizontal connection.
  •  Riser / span from 120 cm : the risers consist of 2 shoulders + 2 horizontal beams and 4 diagonal braces.
  • Terminal: the parapet is composed of 2 lateral shoulders + 2 horizontal terminals and 4 diagonal braces.

Characteristics and dimensions

Maximum work height Structure height

Maximum height to the floor 

Dimensions ing.base

Weight kg.

19,10 mt18,30 mt.17,15 mt.260x114440 

 Standard scaffolding composition  (only structure)

BaseRiser/Span h 1.20 mt

Parapet term. h 1 mt

Enchères  stabilisatrices

Pc. 1Pc. 14Pc. 1Pc. 4

Illustrative image of the height of the M8 scaffold Cod.M8183

altezza ponteggio m8

 IMPORTANT DETAILS SCAFFOLD METAL 8 

                                                                                                                                                                                                                                                                                                                                 

Anti-crushing wheels

The METAL8 scaffolding is supplied with 4 swivel castors with a Ø 200 mm high-capacity nylon brake and neoprene protection. The wheels with these characteristics allow to avoid the crushing of the normal rubber wheels when subjected to not indifferent loads, in addition the neoprene coating protects precious floors from scratches or stains that the normal rubber wheels release.

Fully removable base

The base of the Metal 8 scaffolding can be quickly assembled from 4 pieces in a single piece, this allows for simple and space-saving transport and storage. The base was built to give maximum stability to the scaffold and has a double protection against wear as it is first galvanized and then painted with epoxy powders.

DOPPIA BARRA ORIZZONTALE

Horizontal double bar

The METAL6 / 8 scaffolding are built with maximum stability and safety in mind, for this reason they have double horizontal bars connected in turn. Sturdiness is one of the main points of the Metal6 and Metal8 Professional scaffolding to work comfortably and safely even at height


normative trabattelli

Reference Regulations

The Scaffolding Metal 8 has two standards as reference both in force in the Italian territory, the DLG 81/2008 and refers to the indications of the scope of the European Standard UNI EN 1004. To view the composition according to the legislation just view the table below " compositions, while for the total cost of the scaffolding just select the top curtain "compositions"

PIANO DI LAVORO ANTISCIVOLO IDROREPELLENTE

Work surface anti slip

The worktop is built with a galvanized iron frame and the top is in non-slip treated wood, the car play multilayer wood is treated to withstand bad weather (water, humidity etc.). The top is extremely light and facilitates assembly and disassembly of the scaffolding.

GANCIO ANTIVENTO PER PIANI LAVORO

Security lock

All the Worktops of professional scaffolding are equipped with an anti-wind safety hook.Once the worktop is positioned at the desired height, with a rapid movement, just lower the hook to secure the worktop from any accidental release.

Stabilizing Rods Collar

The stabilizing rods are blocked by means of a double joint with fast coupling / release, this allows total blocking of the element and consequently extreme stability to the scaffold. To move the scaffolding just release the joint slightly and lift the rod.

NOTTOLINO DI BLOCCAGGIO DIAGONALI

Quick coupling pin

The lifting of the risers takes place through diagonals, which are hooked by means of the pin with cascade lever, this system allows the scaffolding to be assembled / disassembled in a very short time and in an extremely easy way. The waterfall lever allows a secure connection of the diagonals.

ACCESSORIO ZOPPO PER SCALE

Lame for overhangs and stairs

The lame can be adjusted every 20 cm and has a minimum overhang of 20 cm and a maximum of 120 cm. this allows the scaffolding to be positioned on stairs, overhangs, etc. The lame can be mounted on the scaffolding on both the short and long sides. Predisposition for mounting the wheels.

Download Technical data sheet
 

CHIAMACI TRABATTELLI PONTEGGI

Reviews

Grade 
12/08/2020

TRABATTELLO

Trabattello ad una struttura forte, sicura e molto stabile.

    Write a review

    Scaffold prof. METAL 8 Mt 19.10 h. Working

    Scaffold prof. METAL 8 Mt 19.10 h. Working

    Scaffolding Mod. M8 Cod.M8183 / M8183HD

    Professional scaffolding M8 working height Mt. 19.10 base dimensions mt. 2.60 x 1.14
    Only structure to add the desired accessories from the appropriate section below Accessories

    Download

    Accessories

    13 other products in the same category:

    Top sellers

    Specials

    PayPal