Aluminum scaffold DOGE 65 H.9.70 mt working

Scaffolding for work at height for intensive use, entirely in aluminum, the doge 65 scaffolding moves quickly even indoors thanks to its compact base.The scaffolding can reach a maximum working height of 10.30 with the aid of additional spans
nb. The working height, that is, the height that you will arrive with your arms stretched upwards and always 1 m. higher than the structure height.

Scaffolding heights

Composition Only structure Code DG6 / 7C:

Composition Complete UNI EN 1004 standard in addition to structure only composition. Cod. DG6 / 7CEN

Download the brochures and certifications of the doge 65 scaffolding

Doge 65 brochure

Assembly manual

TUV certification

Polytechnic certification

Structural features Aluminum scaffolding DOGE 65

The steps, square section mm. 30x30 are strongly locked to the rectangular uprights of the shoulders of mm. 25x65 without the aid of rivets or various welds

The arrows or diagonals are equipped with quick spring connections (stainless steel) that lock diagonal aluminum hooks with extreme ease and safety to the nylon mushrooms with which the shoulders are equipped

The search for advanced industrial technologies has made it possible to equip the ends of the shoulders of DOGE with jointings made with a galvanized steel core and covered with nylon compounds with very high impact and torsion resistance.

The lateral crosspieces are equipped with solid castings of aluminum designed to contain the vertical joints of the shoulders.
Once the shoulders are in the crossbars and just rotate the spring tie rod in a vertical position to obtain a single very solid anti-thread locking between the shoulders and crossbars.

DOGE 65 can be equipped with accessories see in the Accessories section

Levellers that increase stability by enlarging the dimensions at the base. Telescopic screw levelers with excursion up to 450 mm. (Not supplied)

The aluminum stabilizers, adjustable both vertically and horizontally, are equipped with aluminum vice blocks and widen the base up to 1320 mm. each.

The wheels with brakes are linked to the structure by basic aluminum alloy monoblocs, designed to accommodate the levelers, resist shocks, withstand workloads and have a visual impact of exclusive design.

The worktops with trap door and without trap door have the structure as in aluminum and the perimeter band stops 150 mm. they are designed for a load capacity of 200 kg.

The walking surface is in phenolic plywood covered in anti-slip melamine foil.
thus high resistance to atmospheric agents is guaranteed.