Retractable ladder ACI ALUMINUM VERTICAL WALL

Retractable pantograph ladder entirely in die-cast aluminum usable for vertical wall hole. The staircase is complete with a first choice chipboard panel, 16 mm thick.

It is equipped with:
Pz 1 telescopic handrail on the right in the ascent n ° Pz 1 stick to open the ladder and brackets for fixing.
The box or frame is in 1.2 mm thick sheet metal.
Stairs can also be custom built.

On demand:

First choice poplar plywood panel, 14 mm thick, certified with very low formaldehyde emission (class E1 UNI EN 13986: 2005 standard), sealing gasket between box and panel.

The Scala are only and exclusively for civil use. It is not to be installed in environments or workplaces.

CAUTION CAREFULLY CHECK THE OVERALL DIMENSIONS BEFORE PURCHASING. RETURNS WILL NOT BE ACCEPTED FOR WRONG ORDERED MEASURES

THE VIDEO IS REFERRED TO THE MOTORIZED ALUMINUM VERSION

Nb. THE NAME HEIGHT (C) MEANS THE LEAD MEASURE FROM THE CEILING TO THE FLOOR (EXCLUDING THE SLAB THICKNESS)

Nb. It is necessary to respect the dimensions of the trapdoor hole indicated in order not to have problems during assembly.

ATTENTION STAIRS MUST NOT BE WALLED IN THE FLOOR

DOWNLOAD THE ASSEMBLY INSTRUCTIONS