|Poplar plywood panel||+36,00 €|
Galvanized retractable ladder PANTO model for ceilings from 225 to 350 cm. Insole thicknesses from 15 to 27 cm.
Select the AxB hatch hole according to your size in the drop-down menu. Choose the ceiling height from the drop-down menu "H. PAV / SOF.
SCROLL DOWN FOR MORE TECHNICAL DETAILS.
Warning: Last items in stock!
|Poplar plywood panel||+36,00 €|
|Additional telescopic handrail SCARI||+36,00 €|
|Ral white ladder structure||+70,00 €|
|White lacquered MDF panel surcharge||+108,00 €|
|Panel insulation||+66,00 €|
|Floor exit step||+118,00 €|
Accordion or retractable ladder for attic composed of steps made of 15/10 molded galvanized sheet metal and with shock-absorbing and return springs that facilitate the opening and closing of the Panto retractable ladder.
To facilitate the ascent and descent, a telescopic handrail is provided on the right side and handles are provided to facilitate the effortless exit to the upper floor.
The frame of the staircase pack is in 10/10 galvanized sheet steel while the trap door is made of a first choice chipboard panel (16 mm thick) with minimal formaldehyde emission (class E1 standard UNI EN 13986: 2005).
The retractable ladder for PANTO attic can be customized with the first choice poplar plywood panel (15 mm thick) certified with minimal formaldehyde emission (class E1 standard UNI EN 13986: 2005) and can be thermally insulated by insulating the panel of the hatch and adding the “Termocover” accessory, so as to achieve a thermal insulation value of 1.1 W / m2K. SEE IN THE ACCESSORIES SECTION
WARNING CAREFULLY CHECK THE OVERALL DIMENSIONS BEFORE PURCHASING. RETURNS WILL NOT BE ACCEPTED FOR WRONG ORDERED MEASURES
The retractable pantograph ladder for the attic is certified according to UNI EN 14975: 2007 and guarantees a load capacity of 150 kg as it is tested with a static test load of 260 kg.
The retractable attic ladder is shipped completely assembled and ready to be installed.
CxD = WIDTH X STEP DEPTH
Panel in poplar plywood for retractable stairs model PANTO WAL - and PZ 4
Tie rod kit for insoles larger than 27 cm. N.b In this case of adding oversized tie rods, the landing step becomes higher than the ladder standard.
Trapdoor gasket for retractable ladders Model PANTO - VERTICAL PANTOGRAPH AND 4 PCS.
Additional telescopic handrail to be applied only to LADDER models PANTO, PALCO AND PZ 4.
Termocover for SCARI brand retractable stairs model: PANTO - 4PZ - MOTORA 2 sizes available 1) 80X110 CM 2) 80X130 CM If purchased without a retractable ladder, specify the dimensions in the order notes
Staircase coloring in white RAL 9010. OPTIONALS ADDED ONLY TO THE STAIRS MODEL PANTO WALL and PALCO WORKING TIME 10 DAYS.
White lacquered MDF panel surcharge. To be applied on models of SCARI retractable ladders MODELS: PANTO WALL 4PZ AND PALCO Processing time 10 days
Multilayer panel insulation only for SCARI brand retractable ladders Models: PANTO WALL PZ4 TO BE APPLIED ONLY ON MULTILAYER HATCH INSULATION ALSO DOES WITH A SQUARE
MANDATORY floor exit step for slab thicknesses over 35 cm. TO BE APPLIED AS OPTIONAL TO RETRACTABLE STAIRS BRAND SCARI MODELS: PANTO PZ4 AND MOTORA
Retractable wooden ladder with elements that can be closed on itself HOLE...
Galvanized retractable ladder PANTO model for...
Orthogonal joint for fixed scaffolding certified
Nylon wheel with galvanized rotating screw hole support
Replacement springs for retractable ladders. Select the desired length...
Diagonal connection for ALTO and PINNA CLIC Facal Diagonal complete with...
Horizontal conjunction for scaffolds Facal models: Pinna, Pinna click,...
Cast iron and polyurethane wheel