Online only

Fall protection parapet MH12

Valutazione 

MH12

New product

PISCOPIELLO PONTEGGI

Disponibile

Screw mounting railing post, to be applied on flat or slightly inclined surfaces up to a maximum inclination of 10 °; for securing floors, floors, balconies and stairs.

TECHNICAL SHEET FOR MH12 UPRIGHT

More details

Request product info

More info

Traditional type parapet post, with screw mounting, to be applied on flat or slightly inclined surfaces up to a maximum inclination of 10 °. Suitable for securing floors, balconies, slabs and floors. The parapet upright is equipped, at the bottom, with a jointed base instead of being with a sharp edge; this detail allows to avoid possible injuries or abrasions following accidental collisions. This article is indicated for the safety of balconies, slabs, stairs and terraces.
Also available with upright height of 120 cm.

elementi montante parapetto mh12

Montante parapetto - sistema di protezione collettiva Mh12

Parapet post - collective protection system Mh12 The temporary parapet post consists of two elements connected to each other and made sliding one inside the other by a threaded bar. The main element is formed by a vertical upright in square tubular (1) which together with the three bent sheet metal elements (2) constitute the stop for the parapet and toeboard supports.
At the base of the tube (1) there is a fork in bent sheet metal (3) to which a plate (7) is welded which acts as a top support for the upright. The threaded bar (4) for connecting and adjusting the movable lower part (5) is fixed inside the tubular (1).
The second element consists of a square tubular (5) sliding inside the first (1) which has a molded plate (6) positioned at the bottom: the sliding movement of the two described elements is imparted by the crank (8) fixed at the upper end of the threaded rod (4).

Thanks to the tilting plate, the parapet can also be installed on inclined surfaces.

Reference standards and certifications


UNI EN 13374: 2013 standard
Temporary edge protection systems' product specification and test methods.
Legislative Decree No. 81 of April 9, 2008
Protection of health and safety in the workplace.
The parapet has been tested since
Geotechnological laboratory Emiliano s.r.l.
of Parma (Aut. Min. LL. PP. Decree n. 16386 of 13.06.1977 and subsequent renewals):
Certificate No. 1093/2006 of 01.08.2006 and No. 0149/2006 of 06.03.06


Protection system classification: class A

Reference standard EN 13374: 2013
Parapet Technical Sheet

Useful Height

100 cm

Maximum distance from the facade of the building

16.5 cm

Riser tube

30x30x1.5

Support tube

-

Parapet weight

6.0 kg

Certification

class A according to EN 13374: 2013

Center distance of the uprights

180 cm

Section anchor plate -
Section support plate

-

Reviews

Grade 
12/08/2020

PARAPETTO

Parapetto molto sicuro e resistente,

    Grade 
    11/20/2020

    Parapetto

    ottimo prodotto

      Write a review

      Fall protection parapet MH12

      Fall protection parapet MH12

      Screw mounting railing post, to be applied on flat or slightly inclined surfaces up to a maximum inclination of 10 °; for securing floors, floors, balconies and stairs.

      TECHNICAL SHEET FOR MH12 UPRIGHT

      17 other products in the same category:

      Viewed products

      Top sellers

      Specials

      Follow us on Facebook