Scaffold prof. METAL 8 Mt 11.90 h. Working

Valutazione 

New product

PISCOPIELLO PONTEGGI

Disponibile

Scaffolding Mod. Metal 8 Cod.M8111 / M8111HD

Professional galvanized scaffolding Metal 8 working height Mt. 11,90 base dimensions mt. 2.60 x 1.14

Choose the version from the menu: Composition

Standard: Code M8111 only structure to add the desired accessories from the appropriate section at the bottom Accessories

Complete: Cod. M8111HD complete structure with all accessories as per UNI EN 1004 standard

More details

2 855,00 € tax incl.

Request product info

Data sheet

ALTEZZA LAVOROda 11 a 12 mt
MATERIALEFerro zincato
INGOMBRO BASAMENTO250x110 cm

More info

TRABATTELLO METAL 8

METAL 8 PROFESSIONAL scaffolding highly productive thanks to its wide base and therefore also the work surface that the painter or restorer works. The Metal 8 scaffolding allows fewer movements to make a facade, thanks to its productivity.The mobile scaffolding or scaffolding is built in cold galvanized iron with steps and horizontal in tubular 40x15x1.5 uprights of the shoulders 40x1.5 with grafts to 48x3 mm and diagonals in galvanized iron 20x1.5. It has a basic size of 2.60X1.14 m and has a height that varies from 2.70 m to a maximum of 18.30 m. depending on the height you buy or the risers that you remove or add. Metal8 is a scaffolding produced with the criteria of the past, therefore very robust and stable.

METAL 8 STANDARD COMPOSITION 

  • Base m.2,60x1,14: The base is made up of 4 swivel wheels with 200Ø brake driven on a square structure + 2 horizontal connection.
  • Riser / span: the risers are made up of 2 shoulders + 2 horizontal beams and 4 diagonal braces.
  • Terminal: the parapet is made up of 2 lateral shoulders + 2 horizontal terminals and 4 diagonal braces.

Characteristics and dimensions

Maximum work height Structure height  

Maximum height to the floor 

Dimensions ing.base

Weight

kg.

11,90 mt11,10 mt.9,95 mt.260x114305 

Standard scaffolding composition (only structure)

BaseRiser/Span h 1.20 mt

Parapet term. h 1 mt

Enchères  stabilisatrices

Pc. 1Pc. 8Pc. 1Pc. 4

Accessories supplied only in the complete composition UNI EN 1004

Complete plans   Starting plan     

Toeboard

Floor protection kit Scale reg.Scale fixed      
Pc. 4Pc. 1Pc. 1Pc. 1Pc.1Pc. 3

IT IS POSSIBLE TO ADD OTHER ACCESSORIES SUCH AS LEVELERS AND MORE ON THE RIGHT OF THE SCREEN

Illustrative image of the height of the M8 scaffold Cod.M8111-M8111HDImmagine altezze trabattello

IMPORTANT DETAILS SCAFFOLD METAL 8

                                                                                                                                                                                                                                                                                                                   

Anti-crushing wheels

The METAL8 scaffolding is supplied with 4 swivel castors with a Ø 200 mm high-capacity brake in nylon and neoprene protection. The wheels with these characteristics allow to avoid the crushing of the normal rubber wheels when subjected to not indifferent loads, in addition the neoprene coating protects fine floors from scratches or stains that the normal rubber wheels release.

Fully removable base


The base of the Metal 8 scaffolding can be quickly assembled from 4 pieces in a single piece, this allows a simple and space-saving transport and storage. The base was built to give maximum stability to the scaffold and has a double protection against wear as it is first galvanized and then painted with epoxy powders.

DOPPIA BARRA ORIZZONTALE

Horizontal double bar

The METAL6 / 8 scaffolding are built with maximum stability and safety in mind, for this reason they have double horizontal bars connected in turn to each other. Strength is one of the main points of the Professional Metal6 and Metal8 scaffolding to work comfortably and safely even at height


normative trabattelli

Reference Regulations

The Scaffolding Metal 8 has as reference two standards both in force in the Italian territory, the DLG 81/2008 and refers to the indications of the scope of the European Standard UNI EN 1004. To view the composition according to the legislation just view the table below " compositions, while for the total cost of the scaffolding just select the top curtain "compositions"

PIANO DI LAVORO ANTISCIVOLO IDROREPELLENTE

Work surface anti slip

The worktop is built with a galvanized iron frame and the top is in non-slip treated wood, the car play multilayer wood is treated to withstand bad weather (water, humidity etc.). The top is extremely light and facilitates assembly and disassembly of the scaffolding

GANCIO ANTIVENTO PER PIANI LAVORO

Security lock

All the Worktops of professional scaffolding are equipped with an anti-wind safety hook.Once the worktop is positioned at the desired height, simply lower the hook with a rapid movement to secure the worktop from any accidental release.

Stabilizing Rods Collar

The stabilizing rods are blocked by means of a double joint with fast coupling / release, this allows total blocking of the element and consequently extreme stability to the scaffold. To move the scaffolding, just release the joint slightly and lift the rod.

NOTTOLINO DI BLOCCAGGIO DIAGONALI

Quick coupling pin

The lifting of the risers takes place through diagonals, which are hooked by means of the pin with cascade lever, this system allows the scaffolding to be assembled / disassembled in a very short time and in an extremely easy way. The cascade lever allows a secure coupling of the diagonals.

ACCESSORIO ZOPPO PER SCALE

Lame for overhangs and stairs.

The lame can be adjusted every 20 cm and has a minimum overhang of 20 cm and a maximum of 120 cm. this allows the scaffolding to be positioned on stairs, overhangs, etc. The lame can be mounted on the scaffolding on both the short and long sides. Predisposition for mounting the wheels.

CHIAMACI TRABATTELLI PONTEGGI

Reviews

No customer reviews for the moment.

Write a review

Scaffold prof. METAL 8 Mt 11.90 h. Working

Scaffold prof. METAL 8 Mt 11.90 h. Working

Scaffolding Mod. Metal 8 Cod.M8111 / M8111HD

Professional galvanized scaffolding Metal 8 working height Mt. 11,90 base dimensions mt. 2.60 x 1.14

Choose the version from the menu: Composition

Standard: Code M8111 only structure to add the desired accessories from the appropriate section at the bottom Accessories

Complete: Cod. M8111HD complete structure with all accessories as per UNI EN 1004 standard

Download

Accessories

13 other products in the same category:

Top sellers

Specials

PayPal