Scaffold prof. METAL 6 Mt 10.70 h.Working

The scaffolding Metal 6 produced by Piscopiello ponteggi srl is suitable for professionals who need to work at elevated heights but not with maximum safety and stability in the structure. It is made of galvanized steel with steps and horizontal tubes in 40x15x1.5 mm tubular steel. 40x1.5 columns with 48x3 mm clutches. and diagonals in galvanized steel 20x1.5. It has a base size of 2.00X1.10 m. and has a footprint that varies from 2.70 m to a maximum of 18.30 m.

The base consists of 4 wheels with a diameter of 200 mm. swivel with parking brake, the core of the wheel is made of steel and the outside is made of rubber to facilitate movement.

Unlike the Metal 5 model that may seem similar to the scaffolding m6 or other cheaper models, the scaffolding Metal 6 struttaralmente heavier in terms of weight the risers are from mt. 1.20 therefore always compared with the Metal 5 model or others that are simpler and easier to assemble because, being lower, they reduce weight and bulk. The horizontal ones are double instead of single like the Metal 5. In substance the scaffolding model Metal 6 is aimed at those who look for the strength and reliability of the past in the articles and that today is no longer found.
anti-crushing wheel for scaffolding

The Parapet and the base are previously galvanized and subsequently painted with polyester powders for a protection against rust that lasts over time

Elements compositions:

• Base 2.00x1.14: The base is made up of 4 swivel castors with a Ø 200 brake mounted on a 50x50 mm square structure + 2 horizontal connections.

• Riser: the risers are composed of 2 shoulders + 2 horizontal connections and 4 bracing diagonals.

• Terminal: the parapet is composed of 2 side posts + 2 horizontal ends and 4 bracing diagonals.