The scaffold PROFESSIONAL M6 is suitable for professionals who need to carry out work at high heights and not with maximum safety and stability. It is made of galvanized steel with steps and horizontal tubes in 40x15x1.5 mm tubular 40x1.5 cm columns with 48x3 mm clutches and 20x1.5 galvanized steel diagonals. It has a base size of 2.00X1.10 m and has a footprint that varies from 2.70 m to a maximum of 18.30 m. The base consists of 4 swivel wheels with parking brake. Unlike most similar products on the market, the m6 scaffolding or "Mobile Scaffolding" is heavier in terms of weight than the risers are from m. 1.20 therefore simpler and easier to assemble and the horizontal ones are double rather than single and this factor greatly stiffens the structure. Therefore it is mainly aimed at those who look for the strength of the past in the articles and who today is no longer found or it is hard to find.
The Parapet and the base are previously galvanized and subsequently painted with polyester powders for a protection against rust that lasts over time
Elements compositions:
-
Base 2.00x1.14: The base is made up of 4 swivel castors with a Ø 200 brake mounted on a 50x50 mm square structure + 2 horizontal connections.
-
Riser: the risers are composed of 2 shoulders + 2 horizontal connections and 4 bracing diagonals.
-
Terminal: the parapet is composed of 2 side posts + 2 horizontal ends and 4 bracing diagonals.
| DIMENSIONS AND OVERALL DIMENSIONS |
|
Overall height of structure
|
12,30 mt
|
|
Max. Height of work
|
13,10 mt
|
|
Max. Height on the floor
|
11,15 mt
|
|
Basic width
|
1,14 mt
|
|
Base length
|
2,00 mt
|
|
Weight
|
350 Kg
|
|
STANDARD COMPOSITION (STRUCTURE ONLY) |
| Pc 1 |
Galvanized and painted base dim. overall dimensions 200x114 cm Complete with 4 anti-crushing norm wheels of 200 mm. gir. with brake. |
Pc 9
|
Galvanized 120 cm span (2 shoulders, 2 horizontal 4 diagonals) |
| Pc 1 |
Terminal Galvanized and painted railing of 100 cm (2 end shoulders, horizontal terminals, 4 diagonals) |
| Pc 4 |
Stabilizing auction 250 cm |
|
COMPLETE COMPOSITION IN ADDITION TO THE COMP. STANDARD |
Pc 4
|
Complete work surface 185x96 cm (1 fixed top and 1 shelf with trapdoor) |
| Pc 1 |
Full toeboard for worktop |
Pc 3
|
Internal aluminum ladder |
Pc 1
|
Adjustable aluminum internal staircase |
| Pc 1 |
Start shelf for ladder support |
| Pc 1 |
Floor protection kit |
| REFERENCE STANDARDS |
| UNI EN 1004 STANDARD |
| D.l.g.s 81 of 2008 Art 140 |
Important specifications of the UNI EN 1004 standard
The UNI EN 1004 standard allows a maximum scaffolding height of up to 12 Mt in indoor environments and up to 8 Mt. in outdoor environments with no wind. Once these measures have been passed, the Legislative Decree 81/2008 applies
Image M6 heights cod.m66123
Italiano
English
Français
