RETRACTABLE TERRACE LADDER IN IRON WITH 4 ELEMENTS

Retractable ladder for TERRACE with rigid structure with 4 moving parts consisting of 10 steps in 15/10 molded sheet metal and painted white (RAL 9010) and mobile structure made of tubular steel (50 x 20 mm) and shock and return springs for facilitate the opening and closing of the same staircase.

On the staircase there is a double lateral handrail welded on the right and left side of the upright (for widths of 70 cm) - or only on the right side (for widths of 50 cm and 60 cm) - and landing handles to facilitate the exit to the floor higher.

The frame is in 10/10 galvanized steel sheet while the trap door is made of a first choice chipboard panel (16 mm thick) with minimal formaldehyde emission (class E1 standard UNI EN 13986: 2005).

The rigid attic ladder is certified according to UNI EN 14975: 2007 and guarantees a load capacity of 150 kg as it has been tested with a static test load of 260 kg.

The retractable ladder for attic with 4 elements is shipped completely assembled and ready to be installed.

WARNING CAREFULLY CHECK THE OVERALL DIMENSIONS BEFORE PURCHASING. RETURNS WILL NOT BE ACCEPTED FOR WRONG ORDERED MEASURES

STANDARD EQUIPMENT:

• Ladder structure in pressed steel sheet 15/10 protected by electrolytic galvanizing
• Roof access structure made of 15 mm poplar plywood panels, fixed to 10/10 galvanized steel frame
• Landing steps to facilitate the exit to the upper floor (for roof access structures higher than 60 cm)
• Landing handles
• Poplar plywood top cover (15 mm) covered with galvanized steel sheet and cremone opening handle
• First choice poplar plywood panel (15 mm thick) with return shock absorbing springs to facilitate the opening and closing of the staircase (gas spring for dimensions greater than 70 × 100 cm) and reinforcement angles
• Bolted levers for easy scale adjustment
• Cushioning springs to facilitate the opening and closing of the staircase
• Gas spring (for dimensions> 70 x 100 cm)
• Tie for adjusting the maximum opening angle of the ladder
• "L" brackets for anchoring to the floor to facilitate the installation of the staircase
• Telescopic handrail on the right side
• Steps with non-slip shape
• Ground support feet
• Maneuvering rod